Netgear Extender Not Connecting to Router? Here’s the Fix!

Due to the awesome features that Netgear Nighthawk extenders have, they are being used by millions across the globe. However, some users have reported that they’re facing issues with the WiFi device. And one such issue is Netgear extender not connecting to the router. Are you stuck with the same issue? If the answer to the question is yes, know that our experts are here to help you out.

In this article, we’ve mentioned the topmost reasons why you’re facing the issue at hand. Also, you’ll learn how to connect your extender to the router without any hassle. 

Why is Your Netgear Extender Not Connecting to the Router?

Before we discuss how to resolve the issue, it’s important that you identify the reason behind it. This will help you resolve the issue both quickly and efficiently. 

While there could be plenty of reasons why your Netgear Nighthawk extender is not connecting to the internet, identifying the one that actually caused the issue is critical. Mentioned below are some of the most common factors stopping your WiFi devices from connecting:

  • Impartial Netgear Nighthawk extender setup
  • Your extender and router are connected wirelessly
  • The cable connecting your devices is worn out or damaged
  • Your WiFi devices are not connecting after improper reset
  • The Nighthawk extender can’t locate the wireless network
  • Loose cable connection or faulty hardware

Thus, these were the topmost culprits why you’re being bothered by the poor connection between your WiFi extender and router. Now, read on and take a glance at the troubleshooting tips outlined below. 

Troubleshooting: Netgear Extender Not Connecting to Router

Check the Modem and Router

One of the major reasons why your Netgear extender isn’t connecting to the router is because your router isn’t properly connected to the modem. Therefore, make sure that the connection between your modem and router is strong enough. 

Use an Ethernet Cable

Another common mistake that users make while connecting their Nighthawk extender to the router is using a wireless source. As fascinating and convenient connecting devices wirelessly sounds, the method is quite risky. In other words, there’s no guarantee your device will STAY connected with a wireless source. 

To troubleshoot this issue, it is recommended that you connect your extender and router with an Ethernet cable. Using an Ethernet cable to connect your devices is a risk-free option to consider. Just make sure that the cable you’re using doesn’t have any cuts, breakage, or any other damages. 

Perform Netgear Firmware Update

Ensure that the firmware of both  your Netgear Nighthawk extender and WiFi router is updated to its latest version. Updating your WiFi devices is a piece of cake. All you need to do is, access the Netgear Nighthawk setup page, go to Settings, and click on the Firmware Update button. 

Power Cycle or Reset Your Device

Chances are that there’s some internal issue that’s causing all the fuss. But, worry not. You can either restart or reset your Netgear Nighthawk extender. If there are any technical glitches, power cycling your device will resolve it. In case there’s something major going on, restoring your device to its factory default settings will fix it.

Here’s how to power cycle your Netgear Nighthawk device:

  • Power both your extender and router.
  • Wait for a couple of seconds and let your devices relax.
  • Now, turn on your devices and connect them with a cable. 

Here’s how to reset your Netgear Nighthawk WiFi extender:

In a couple of seconds, your extender will get restored to its factory default settings. Once done, try again connecting your Netgear Nighthawk extender with the WiFi router. Another common blunder made while connecting a Nighthawk extender to a router is using a wireless source. The approach of linking gadgets wirelessly, as exciting and convenient as it sounds, is rather unsafe. To put it another way, there’s no guarantee that your device will remain connected to a wifi source.Your router isn’t correctly connected to the modem, which is one of the main reasons your Netgear extender isn’t connecting to it. As a result, make sure your modem and router have a strong enough connection.It is recommended that you use an Ethernet cable to connect your extender and router to troubleshoot this issue. Connecting your gadgets using an Ethernet wire is a risk-free solution to consider. Simply ensure that the cable you’re using is free of cuts, breaks, or other damage.After that, reconnect your Netgear Nighthawk extender to your WiFi router.

%d bloggers like this: