Machines and scissors need a drop of oil

“All you need is a drop of oil.” These words are true not only for sewing machines and surgeons but also for scissors.

Sewing machine oil is essential for working on a sewing machine. Use ointment for sewing machines and surgeons. Do not use multifunction oil or WD-40. This can be harmful to your car. As usual, apply one or two drops of oil on the abrasive parts of the metal. The most common areas for lubrication are in the Boban and Haka areas. Elsewhere, there may be bobbin lock mechanisms and oil ports. See the sewing machine manual for lubrication instructions and sketches. Most newer computers do not require oil refining like older models.

How often do you have to refuel the car? Most modern, computerized machines are equipped with a temporary message that tells you when to send your car with fuel. After enough stitching, the car will show you the message that you need to drink. The basic premise is that the more you use the car, the more you need to lubricate it. Most sewing machine sellers recommend sewing every 10-12 hours. Listen to the machine oil/lubricant. If there is a slight sound, add a drop of oil. This can only happen when needed. If you have any doubts about oiling the car, ask the sewing machine dealer.

If your thread breaks repeatedly, try putting a drop of oil on the bobbin area of ​​the car. This allows the upper thread of the bobbin drawer to work easily around the bobbin. Most of the time, when teaching, when someone has a hard time breaking the thread, I suggest putting oil in the car first. Of course, this is not the only reason the thread breaks, and usually the problem is partially resolved.

After lubricating your car, always sew some stitches from the piece of cloth. It consumes too much fat. If you start sewing in your design, the yarn that extends to the fabric may end up with oil. In that case, ask yourself, “How did this place appear?” See instructions for removing oil stains.

Your sewing scissors and thread sniper – a drop of oil may be needed in the sewing room. When collecting scissors, try adding a small amount of oil. Open the knife and put a drop of oil in the middle of the knife. Open and close the knives several times and let the oil stick to the scissors for a few minutes. Assemble the screws and wipe the blade with a dry cloth. Cut off several tissues to remove excess oil. You need to lubricate your scissors several times a year. This will reduce friction between the blades and make the fabric easier to cut. This will make your scissors smoother and longer.

During my business trip last month, I learned about different cars. I have a bachelor’s degree and now work as a marketing partner at a research institute. My main job is to do research on different plants and gather valuable information about different techniques. One of the cars I’m most interested in is the oil extractor. In this article, I will share my knowledge about the machines I acquired during my visit.

Although there are many extractors, the most widely used are oil extractors.

This diagram and screw printer has a badge pressure chamber on one side of the press. Exposure machines use pressure actuators and friction to compress oil seeds. The oil comes out of the seeds through small holes. I asked the operator why these keys are small. He explained that these holes prevent them from mixing with solid or seed oil. The solid waste from these wastes or seeds is on the other end of the machine. This remaining fat is called cake.

I was very interested to know more about this car, so the operator easily answered all my questions. From time immemorial, people have been getting oil from oil seeds. So what’s the difference? The former seeds were simply cleaned with a grinder or a stone grinder. With the advancement of science and technology, the use of automatic oil extractors to extract oil from oil seeds or nuts has begun. These machines have made the production process much easier.