Are you bothered by a patchy internet connection on your Linksys Velop extender? We understand how a poor internet connection can slow down your life. A reliable internet connection is a must requirement in this digital era. But, it can be irritating if your Linksys Velop node keeps going offline. Well, you need not worry. In this article, you will find a list of solutions to fix the issue you are facing. But, before that, let’s have a look at the reasons that are making your Linksys Velop node go offline.
Why Your Linksys Velop Node Keeps Going Offline?
- An improper connection between your Linksys Velop extender and the router.
- The WiFi signals of your Linksys Velop system are being interfered.
- The firmware of your Linksys Velop extender is outdated.
- Overheating of your Linksys Velop extender.
- Partial Linksys velop setup .
Now that you are aware of the reasons that might have led you to the ‘Linksys Velop node keeps going offline’ issue, it is time to address them with the following troubleshooting tips.
Fixed: Linksys Velop Node Keeps Going Offline
- Reboot Your Velop Extender
Before you do anything else, we recommend you implement the timeless IT advice – ‘If it doesn’t work, try switching it off and on’. It means you have to reboot your Linksys Velop extender.
To reboot your Linksys Velop, unplug it from the wall outlet, let it rest for a while, and then, switch it back on. Once done, check if your Linksys Velop node is still going offline. If it is, then take a look at the next troubleshooting hack.
- Check the Connections
Check whether the connection between your Linksys Velop extender and the router is stable or not. If the Ethernet cable connecting your WiFi devices is damaged, then you are suggested to replace it with a new one. And, the golden rule of a stable connection remains the same.
- Avoid WiFi Interference
It is quite important to keep your Velop system away from WiFi interference during and after Linksys extender setup . Probably, you’ve placed your Linksys Velop extender in a room filled with WiFi interfering devices.
To rectify this, ensure that your extender is placed away from mirrors, fish tanks, Bluetooth speakers, microwave ovens, baby monitors, washing machines, etc.
- Perform Linksys Firmware Update
An outdated firmware not only slows down your extender’s performance but can also make it non-functional. Therefore, updating the firmware of the Linksys Velop extender is also an effective way to get rid of the issue you are currently facing.
You can update the firmware of your Velop system by accessing the Linksys app. All you need to do is, log in to your Linksys Velop extender and tap the Network Administration option under the Menu icon. Thereafter, tap the Update Now option. The firmware of your Linksys Velop extender will get updated.
- Prevent Overheating of Extender
Your Linksys Velop system might overheat if it is placed in a congested area. To prevent overheating of your extender, avoid placing it inside a closet or beneath a table. Place it inside a well-ventilated room instead.
Also, clean your WiFi device regularly with a cloth. Doing so will not allow the dust to accumulate on your Linksys Velop system and prevent overheating.
- Reset Your Linksys Velop Extender
If none of the aforementioned hacks bring you success, then your Linksys Velop node might be going offline due to the partial setup process. So, you need to set up your extender properly. But, before that, restore it to the factory default settings.
To perform Linksys extender reset , ensure that your Velop system is receiving a fluctuation-free electricity supply. Once assured, locate the Reset button and press it with the help of a pin-like object. Your Linksys Velop system will get restored to the factory default settings. Now, configure it from scratch using the Linksys app.
That’s how you can get rid of the ‘Linksys Velop node keeps going offline’ issue. We hope that this article will help you in resolving the issue and bring back your digital life on track.