TP-Link extenders are titled one of the best networking devices today. When it comes to accessing a lightning-fast internet connection, TP-Link extenders are at par. But, there’s a dark aspect of everything. Many users have reported about their TP-Link extender flashing orange. Are you also going nuts due to the same issue? If so, then this post will end your misery. Here, we will provide you with a list of hacks that will help you get the problem resolved in the blink of an eye. So, read on.
Fixed: TP-Link Extender Orange Light Issue
- Reboot the Extender
No matter how high-class a networking device is, it can fall victim to technical glitches. Chances are that your TP-Link extender is also struggling with the same. But, that’s not a matter to worry about. You can get rid of technical glitches by giving a fresh start to your extender. Here are the guidelines that will help you reboot your TP-Link extender.
- Turn off your TP-Link extender and unplug it from its power source.
- Wait for some time.
- Plug the extender back into its power source and turn it on.
Note: You can also reboot your TP-Link extender by accessing the http tplinkrepeater net login screen.
Now, check whether your TP-Link extender is still flashing orange. If it is, walk through the next troubleshooting hack.
- Connect WiFi Devices Properly
Perhaps, the connection between your TP-Link extender and the host router is not strong. Thus, you need to check for the same. If you have connected your WiFi devices using a wired source, then make sure that the Ethernet cable in use is not having wear and tear. If it has, then get yourself a new Ethernet cable.
In case you have used a wireless source to connect your devices, ensure that there is a safe distance between them. Keep in mind that too much distance between them can affect communication. On the other hand, if they are placed too close, a clash of their WiFi signals is most likely to happen.
- Relocate the Extender
Another reason behind the TP-Link extender orange light issue might be the wrong placement of the device. Therefore, the extender needs to be relocated.
Remember that your TP-Link extender should be away from corners, concrete walls, metal objects, and utensils carrying a large amount of water. Apart from this, the extender shouldn’t be placed near televisions, refrigerators, microwave ovens, Bluetooth speakers, treadmills, baby monitors, etc.
- Update the Firmware
The functioning of the TP-Link extender completely depends on the firmware. If not updated timely, then it can lead you to issues similar to the one you are already struggling with. So, before you run out of time, consider updating your extender. For your ease, we have summed up the process to update the firmware of the TP-Link AC750 extender:
- Open a web browser on your PC and download the firmware file for your TP-Link AC750 extender.
- Now, unzip the file and save it at the most convenient location on the PC.
- Thereafter, visit the official website of the TP-Link extender and log in to it.
- When you reach the TP Link AC750 setup, look for the Firmware Update option under the Settings tab.
- Upload the file and let your extender reboot after the completion of the firmware update process.
In this manner, you can update the firmware of your TP-Link extender via a web browser.
- Reset and Reconfigure the Extender
If nothing has worked in your favor so far, then chances are that you haven’t set up your TP-Link extender properly. Therefore, we recommend you perform factory default reset of your extender. Given below are the instructions explaining how you can go about the reset process of the TP-Link extender:
- Ensure that your TP-Link extender is getting a fluctuation-free power supply.
- Once ensured, find the Reset button located on your device.
- Thereafter, grab a sharp object.
- Press the Reset button with the help a sharp object.
- Your TP-Link range device will get restored to the factory default state.
Once your extender resets, reconfigure it either using a web browser or the TP Link app.
This was all about what to do to resolve the TP-Link extender orange light issue. We hope that the troubleshooting hacks discussed above will help you in bringing your extender back to its normal working state.