Typical moving services aren’t usually a big deal, even if you have larger items like a couch or piano. Usually, you can perform regular moves without special equipment, or you can hire an everyday mover to help. It becomes a lot more challenging when dealing with extremely large or heavy items, though. This is where the term “heavy hauling” comes into play. If you’re considering using these services, it’s essential to know a few things beforehand. The right preparation can save you time and money while keeping everyone safe in the meantime.
What Does Heavy Hauling Mean?
At any given time, there are hundreds of large trucks on the road. Many of these are what we refer to as heavy haulers. Heavy hauling is essentially what it sounds like – the transportation of very large and/or heavy items. This term is most often used in reference to construction equipment or other oversized objects that can’t be moved via traditional means. You might be familiar with heavy haul items moved on the highway. They are the massive, prefabricated homes, long metal beams, or other large objects that are often seen being towed slowly behind a truck. Some examples of items that would require heavy hauling include:
- Large construction equipment
- Hot tubs
- Mobile homes
Now that we know a little more about what heavy hauling is, let’s take a look at some things you should keep in mind if you’re considering using these services. Completing these tasks beforehand can ensure your equipment arrives safety and on time while being in compliance with Federal law.
1. Special Permits Are Required
If you’re planning on transporting anything that is too large or heavy for a standard vehicle, you will need to obtain the proper permits before doing so. This is non-negotiable – without the right permits, you will not be able to legally transport your item. The process of obtaining a permit can vary depending on where you live, but it is typically not too complicated. You will likely need to provide the dimensions and weight of your item, as well as your intended route.
There may also be restrictions with your permit, too. These may include the time you are allotted to travel, operating hours, along with holiday and weekend travel. It’s important to be aware of these restrictions before you begin your journey, as you could be fined for not following the rules.
2. Travel Requirements
When you’re transporting something via heavy hauling, there are typically going to be some travel requirements you need to follow. For example, you’re not allowed to just load up your item and hit the road – there are specific regulations in place to ensure everyone’s safety.
You will need to ensure your item is properly secured before setting off. This means checking that it is securely fastened to the vehicle so that it doesn’t move or shift during transport. If your item is not properly secured, it could come loose and cause serious damage or injury.
Your truck also needs to meet the U.S Department of Transportation regulations. For example, a single axle has a limit of 20,000 pounds, and the total gross weight of your vehicle is limited to 80,000 pounds.
Other normal requirements include the following:
- Including “oversize” load banners- Should be placed on the front or back of the vehicle that is either carrying or traveling alongside the shipments. The signage could say “wide load” as well.
- LED lights- Most states require these to be placed on the corners of the vehicle or shipment and on the back. The lights help other drivers see your vehicle and know to use caution.
- Escort or pilot vehicle- These vehicles alert motorists on the road of an oversized load and help direct traffic if needed.
3. Insurance Requirements Vary
Liability coverage is mandatory for all vehicles on the road, but the amount of coverage you need could vary depending on what you’re transporting. This figure could range anywhere from $250,000-1 million depending on what’s being hauled, the value of the item, and other factors.
It’s important to note that general liability insurance will not cover any damage that occurs to your shipment. Therefore, you might need to purchase additional coverage, or you could be held responsible for the repairs.
4. Hiring an Experienced Professional Is Imperative
When dealing with something as large and potentially dangerous as a heavy haul, it’s always best to leave it to the professionals. Heavy haul trucking companies will ensure that your shipment is appropriately secured and transported. Look for someone with a proven track record of success and familiar with the route you’re taking.
Choosing the wrong heavy hauling movers can have severe consequences, such as your shipment being damaged, severe injury, or thousands of dollars in legal expenses. However, these individuals can also save you precious time, as they often know the best routes to take, or alternative ones should an emergency situation occur.
5. Route Restrictions
There are going to be some areas that are off-limits for heavy hauling. These typically include low bridges, tunnels, and other tight spaces. If your shipment needs to travel through one of these areas, you will need to obtain a special permit. You might also need a permit if you’re traveling on certain roads or highways. The rules vary from state to state, so it’s important to do your research beforehand.
Heavy hauling is no joke – it requires careful planning and execution. By following these five tips, you can ensure that your shipment arrives safe and sound. Always do your proper research and work with a company that knows what they’re doing. Heavy hauling can be a little less daunting with a bit of preparation.